68komputer

68komputer is a homebrew computer based around the Motorola 68000 processor, and an ecosystem of peripherals and software to go with it.

The standard 68komputer processor board, featuring 1MB of 0 wait state SRAM and flash, 32K of NVR...

Peripherals can be connected to the CPU board through the expansion connector, a 96-pin, 3 row DI...

Debug board F202 footprint appears to be too large for the fuse ordered (NANOSMDC050F/13.2-2) ...

Cards are interconnected via a simple backplane. Together with a management card, the backplane p...

Using 96 position (3x32) DIN 41612 connectors; right angle male on expansion cards, vertical fema...

A backplane which supports up to six expansion cards, meant to go into a 3U VME crate. Feature...

Provides +5V and +12V power and supervision for backplane, and audio output.

Unlike other expansion boards, this one is required to operate the backplane, primarily to power ...

This page lists any assembly remarks and issues with each revision of the board. Rev 1 5V pow...