Rev1 Assembly Notes

F202 footprint appears to be too large for the fuse ordered (NANOSMDC050F/13.2-2)
F201 is actually 1.1A, not 1.5A as the schematics indicate
Caps under Teensy (C316/C317) could use with being moved a bit
U508/U509 package sucks ass
C512/C511 should be further away from IC in -Y
The indications for RESET and HALT are inverted (D401, D402) from what they should be
Teensy USB port interferes with J302 with some USB cables
Solder pads for DIN connectors could be slightly wider copper
Logic probe connectors need more spacing in Y direction to fit the probes

Reset and NMI button logic is inverted from what it should be (lol)
- U501 shouldn't be inverting type (use 74HC2G17 instead)
D201 should be further set back (.3mm) from board edge
- The H100 series LED seems to have a slightly different pin-to-front distance than the H201 double LED indicators
5V Analog caps (C608, C609, C614) should be up more
LED current limiting resistors are out of whack
- Lower the current limiting resistors for right angle LED indicators (needs more current)
- Increase the current limiting resistors for two bonus debug LEDs (needs less current)