BlazeNet

Wireless protocol for home automation

Description of the wireless protocol used to communicate with devices

Wireless devices in the network communicate using this custom RF protocol layer. It guarantees re...

This page describes the physical radio configuration for use in sending packets over the air. 91...

To add a device to an existing BlazeNet network, it will need to be paired to the network. This p...

This page describes the security/authentication mechanisms in use by the protocol. Background E...

This chapter outlines the encoding/format of various packets.

All messages sent over the air take the form of a packet. Packets encapsulate the actual user dat...

This page describes the format of beacon frames. Fixed Part Every beacon frame starts out with ...

Notes on the first revision coordinator hardware and software

Collection of some notes on the rev1 coordinator hardware Assembly Combine 100nF capacitors o...

This page collects some notes about the host-driven RF firmware, running on the EFR32FG23 chip on...

Some notes about the Linux host firmware (see this GitHub repo). UARTs don't work in DMA mode ...